1) Composition：
AMI1 organic water resistant emulsion is made by nano class emulsion and additives.
2)Function:
Mixed emulsion with cement and then plaster. It can form a crystal layer at the wall surface. This layer is capable to seal all tiny pores and small cracks in the wall in order to form a protection layer. Both the water facing wall and the back wall can be applied to achieve long lasting water resistant effects.
3) Product merits:
A. Eco-friendly, no toxicity, no harmful component, no pollution,
B. Fast drying time: the application time is reduced.
C. Can be applied at rough surface.
D. AMI-1 has excellent water resistance function, It is suitable to apply on the long lasting soaked objects.
E. Good anti-aging and anti-freeze ability, sustain high and low temperature, capable to protect steel frame not to be oxidatively corroded.
F. Easy to apply. There is no need special trained persons to paint. You can do it by yourself.
G. Can be applied directly on the damped and wet surface. The emulsion can hold the surface tightly and seal the tiny crack.
4) Scope of applications:
Indoor and outdoor water resistance: roof, wall, kitchen, bathroom, balcony, floor, floor trough, drinking water tank, swimming pool, fish pond, sewage treatment tank, basement, warehouse, basement parking lot, subway station, tunnel, building foundation, etc.
5) Method of use:
A. Base treatment:
The surface needs to be rigid, flat and clean. Cracks are filled with cement or mortar. The 90 degree surface needs to be re-shaped, to become semi-circle and fully moisture but no water. Newly filled up cement surface needs to be fully dry.
AMI1 organic water resistant emulsion is made by nano class emulsion and additives.
2)Function:
Mixed emulsion with cement and then plaster. It can form a crystal layer at the wall surface. This layer is capable to seal all tiny pores and small cracks in the wall in order to form a protection layer. Both the water facing wall and the back wall can be applied to achieve long lasting water resistant effects.
3) Product merits:
A. Eco-friendly, no toxicity, no harmful component, no pollution,
B. Fast drying time: the application time is reduced.
C. Can be applied at rough surface.
D. AMI-1 has excellent water resistance function, It is suitable to apply on the long lasting soaked objects.
E. Good anti-aging and anti-freeze ability, sustain high and low temperature, capable to protect steel frame not to be oxidatively corroded.
F. Easy to apply. There is no need special trained persons to paint. You can do it by yourself.
G. Can be applied directly on the damped and wet surface. The emulsion can hold the surface tightly and seal the tiny crack.
4) Scope of applications:
Indoor and outdoor water resistance: roof, wall, kitchen, bathroom, balcony, floor, floor trough, drinking water tank, swimming pool, fish pond, sewage treatment tank, basement, warehouse, basement parking lot, subway station, tunnel, building foundation, etc.
5) Method of use:
A. Base treatment:
The surface needs to be rigid, flat and clean. Cracks are filled with cement or mortar. The 90 degree surface needs to be re-shaped, to become semi-circle and fully moisture but no water. Newly filled up cement surface needs to be fully dry.
B. Stir:
To pour over the emulsion first and then to add powder slowly at the ratio of emulsion to powder at 1:0.8. Fully stirred 3 to 5 minutes until there is no dough left.(Blender is recommended to use.)
C. Applications:
To paint the surface by brushes and rollers directly. It is recommended to paint more than two coatings and the thickness of each apply is no more than 0.5mm. After the previous coating gets dry (not sticky) then one can start the next coating. The direction of the next coating is vertical to the previous coating. The total thickness of the emulsion is more than 1mm.
D. Cautions:
- Emulsion AMI1 needs to be mixed with powder.
- Protect the emulsion:
- Curing the emulsion:
- Verify the water resistant effect:
