1) Composition:
The liquid is composed of the abstracts from plants and mineral as well as several eco-reactants.
2) Mechanism of water resistance:
The liquid can infiltration deeply into the concrete and bricks. After chemical reacts, a water resistant layer is formed. The water resistant effects is 50 times higher than other surface sealing material and have the same lifetime as the buildings.
3) Characteristics:
A. Long-term durability:
The liquid will be effected at the same lifetime as the structure once applied. The liquid can applied on different base material.
B. Breathability:
The liquid will not fully seal the surface. The liquid can resist the external water. However the internal moisture can be vaporized outward.
C. Easy to use:
There is no need to knock out the floor tiles. The liquid can apply on the leakage part directly. One person can apply 800 square meter per day. The applying speed is about 10 times of those ordinary paints. The labor cost drops dramatically.
D. Eco-friendly:
There is no waste water, waste gas or noise during applying. The liquid is a green product. It has no pollution, not harmful to human body, non-toxic, not burning, non-volatile. The liquid is transparent. The structure color remains the same after the liquid is applied.
4) Scope of application:
The liquid is mainly applied on concrete based structures. For internal and external walls where the water pressure is not high the liquid can be mixed into the sand. Then the concrete becomes rigid water resistant base. The liquid has very good water resistant effect when applied on textile, tile, stone, mud wall, white ash, plaster.
5) Method of use:
A. Base treatment:
The surface is rigid, flat, dry, no sanding, no crack, no rugged surface, no dust, no oil trace.
B. Condition to apply:
The ambient temperature is higher than 5oC. The moisture content of the base is no more than 5%. For outdoor applications, no wind and sunny weather is preferred. The weather condition needs to be monitored to make sure there will be no rain or snow 48 hours after application.
C. Method of use:
The nano class breathable water resistant liquid is diluted with eight times water. After well stirred, pouring into the machine to spray. To spray the higher location first and then the lower location. The liquid slightly flowing is preferred. The next spray is applied when the previous spray is NOT dried yet. Please note: if the next spray is applied after the previous spray is fully dried, the water resistant effects may not be obtained as expected.
The liquid is composed of the abstracts from plants and mineral as well as several eco-reactants.
2) Mechanism of water resistance:
The liquid can infiltration deeply into the concrete and bricks. After chemical reacts, a water resistant layer is formed. The water resistant effects is 50 times higher than other surface sealing material and have the same lifetime as the buildings.
3) Characteristics:
A. Long-term durability:
The liquid will be effected at the same lifetime as the structure once applied. The liquid can applied on different base material.
B. Breathability:
The liquid will not fully seal the surface. The liquid can resist the external water. However the internal moisture can be vaporized outward.
C. Easy to use:
There is no need to knock out the floor tiles. The liquid can apply on the leakage part directly. One person can apply 800 square meter per day. The applying speed is about 10 times of those ordinary paints. The labor cost drops dramatically.
D. Eco-friendly:
There is no waste water, waste gas or noise during applying. The liquid is a green product. It has no pollution, not harmful to human body, non-toxic, not burning, non-volatile. The liquid is transparent. The structure color remains the same after the liquid is applied.
E. Environmental adaptability:
The liquid is acid resistant, corrosion resistance, easy to adapt to the environment and to maintain its water resistant function. The liquid can be applied at above 5oC and sustain temperature between -70oC to 180oC after the liquid is curing.4) Scope of application:
The liquid is mainly applied on concrete based structures. For internal and external walls where the water pressure is not high the liquid can be mixed into the sand. Then the concrete becomes rigid water resistant base. The liquid has very good water resistant effect when applied on textile, tile, stone, mud wall, white ash, plaster.
5) Method of use:
A. Base treatment:
The surface is rigid, flat, dry, no sanding, no crack, no rugged surface, no dust, no oil trace.
B. Condition to apply:
The ambient temperature is higher than 5oC. The moisture content of the base is no more than 5%. For outdoor applications, no wind and sunny weather is preferred. The weather condition needs to be monitored to make sure there will be no rain or snow 48 hours after application.
C. Method of use:
The nano class breathable water resistant liquid is diluted with eight times water. After well stirred, pouring into the machine to spray. To spray the higher location first and then the lower location. The liquid slightly flowing is preferred. The next spray is applied when the previous spray is NOT dried yet. Please note: if the next spray is applied after the previous spray is fully dried, the water resistant effects may not be obtained as expected.
D. Acceptance test:
48 hours after completed the application, the acceptance test is conducted under fully dried base. 
