1) Composition:
The compound is synthesized from the abstracts of plants and minerals, and reforms their properties.
2) Water resistant mechanism:
The water resistant compound dissolved in water. The liquid penetrates through the gap, yields swell and curing reaction after a period of time, and forms an acid and alkali resistant highly flexible 100% water resistant glue. The glue is capable to cross-linked concrete together, to fill up all the gaps, and to reach the water proof purpose.
3) Characteristics:
A. Eco-friendly:
Non-toxic, no pollution, not harmful to human.
B. High technology:
The new material is capable to cure the floor tile leakage completely and effectively.
4) Scope of application:
The compound is mainly apply to the tile leakage at floor or wall on bathroom, kitchen, balcony, water pound, etc. It is very effective when applied at damped area growing mold like bathroom wall and entrance (so called wall cancer).
5) Method of use:
A. In order to avoid the pipeline leakage, it is suggested not to use water for 3 to 5 days to keep the working area dry.
B. Remove the debris on the brick seam. Use wet tower to block the drain. Prepare 12-15kg clean water. Add powder into the water, stir until the powder fully dissolved. Evenly spray the liquid on the floor. (If the brick seam is too small, drill small holes is recommended.) In order to avoid the liquid is not sufficient to use when the filtration is too fast, then the concrete cannot reach the saturated state. It is recommended to prepare two more sets of liquid to back up before start to spray.
C. Using broom sweeps back and forth to prevent the liquid infiltrate into the tiles.
D. After one hour, clean all the cured product on the floor. After two hours, the floor can be used as normal.
6) Precautions on usage:
A. It is forbidden to add powder in the container first. (In order to avoid any safety accident happened, the powder touched a little bit of water will release heat rapidly.)
B. Having more liquid permeates into the concrete in order to obtain the best effect, it is recommended the applied area not to use water for 1~3 days.
C. The floor drain needs to be blocked before spray the liquid in order to prevent the drain being blocked by the curing compound.
D. The thoroughly stirred liquid needs to be used in half an hour to prevent the formation into gel.
The compound is synthesized from the abstracts of plants and minerals, and reforms their properties.
2) Water resistant mechanism:
The water resistant compound dissolved in water. The liquid penetrates through the gap, yields swell and curing reaction after a period of time, and forms an acid and alkali resistant highly flexible 100% water resistant glue. The glue is capable to cross-linked concrete together, to fill up all the gaps, and to reach the water proof purpose.
3) Characteristics:
A. Eco-friendly:
Non-toxic, no pollution, not harmful to human.
B. High technology:
The new material is capable to cure the floor tile leakage completely and effectively.
4) Scope of application:
The compound is mainly apply to the tile leakage at floor or wall on bathroom, kitchen, balcony, water pound, etc. It is very effective when applied at damped area growing mold like bathroom wall and entrance (so called wall cancer).
5) Method of use:
A. In order to avoid the pipeline leakage, it is suggested not to use water for 3 to 5 days to keep the working area dry.
B. Remove the debris on the brick seam. Use wet tower to block the drain. Prepare 12-15kg clean water. Add powder into the water, stir until the powder fully dissolved. Evenly spray the liquid on the floor. (If the brick seam is too small, drill small holes is recommended.) In order to avoid the liquid is not sufficient to use when the filtration is too fast, then the concrete cannot reach the saturated state. It is recommended to prepare two more sets of liquid to back up before start to spray.
C. Using broom sweeps back and forth to prevent the liquid infiltrate into the tiles.
D. After one hour, clean all the cured product on the floor. After two hours, the floor can be used as normal.
6) Precautions on usage:
A. It is forbidden to add powder in the container first. (In order to avoid any safety accident happened, the powder touched a little bit of water will release heat rapidly.)
B. Having more liquid permeates into the concrete in order to obtain the best effect, it is recommended the applied area not to use water for 1~3 days.
C. The floor drain needs to be blocked before spray the liquid in order to prevent the drain being blocked by the curing compound.
D. The thoroughly stirred liquid needs to be used in half an hour to prevent the formation into gel.
